Medical Emergency Alarm Systems
The Model PERS-3600B Personal Emergency Reporting System is a supervised wireless emergency reporting product designed for medical alert applications. The table-top Console provides pushbutton emergency assistance to anyone who desires additional security and peace of mind. For the visually impaired, each button on the Console is molded with brailed characters to identify the button’s function.
The emergency alarm can be triggered by the large HELP button on the top of the Console or with a wireless transmitter. The fire alarm or carbon monoxide alarm can be triggered by wireless smoke alarms.
To simplify operation, the Console can “speak” to the subscriber with its built-in digitally synthesized voice. The Console will say “emergency”, “fire”, “timer done soon”, and other system operation, setup, and supervisory prompts from a 49 word vocabulary. If necessary, the voice option can be disabled.
The Console can perform 2-way voice activated (duplex), 2-way manual, and 1-way listen-only audio communications through the Console’s built-in high-sensitivity microphone and speaker. Communications with central station monitoring personnel starts after an alarm. Two-way communications can also be started without any subscriber action. An authorized individual may call the Console twice from any touchtone telephone and activate two-way voice communications by keying in a four-digit password after placing the second call.
As a special feature, the PERS-3600B Console can record and play up to approximately eight 15-second audio reminder messages. The reminder messages can be used to help the subscriber remember to take medications, call someone, get ready for an appointment, etc. Each message is controlled by a real time clock and can be programmed via the RA-2400 software to play daily, every other day, weekly, or monthly. Reminder messages are played and repeated in three-minute intervals for either 15 or 30 minutes (programmable) until canceled. Messages can also be programmed for single-play.
The Console can be programmed to act as a remote controlled “speakerphone”. With the speakerphone mode enabled, the Console will monitor the telephone line for an incoming call. Activating any emergency transmitter (or the Console’s HELP button) while the telephone is ringing will cause the Console to seize the line and begin speakerphone communications. Activating any emergency transmitter (or HELP button) during the call will disconnect the line. The Console will auto-disconnect after 15, 30, or 60 minutes (programmable).
- Two-way voice capability
- Suitable for temporary or permanent installations
- Braille characters for HELP, HOME, and CANCEL buttons
- Unique call-in communications feature
- Speakerphone capability
- Reminder message capability
- Delayed, silent alarm feature
- Selectable inactivity reporting: 8, 12, or 24 hours
- Selectable two-way voice activation
- Single telephone seizure and true phone line seizure capability
- Distinct alarm tones provided for emergency and fire alarm conditions
- Power on/off switch
- Capacity for up to 16 DX/DXS transmitters
- Point ID communicator reporting
- Programmable with Windows-based RA-2400 Software
- Installs in minutes
- UL listed per standard 1637
- DX and DXS format
- Operating Frequency: 315 MHz
- Backup battery size: 12 volts, 1.2 Amp/hour (30 hour backup)
- 9″ W x 5″ H x 5-1/2″ D